Style Arc Barb's Stretch Pants and another Coco

The Style Arc Barb's Stretch Pants have been the most worn garment in my wardrobe over the last twelve months. I'm really not sure why I have never blogged about them until now, although they have made several sneak appearances in previous posts.

Style Arc Barb's Stretch Pants with boot cut alteration.

The size 12 fitted well straight out of the envelope, without any fit alterations. You may notice that I have added some flare, beginning around knee level and increasing down to the hemline. I prefer the boot cut style over the straight style. Here is a photo taken last year of my first pair of Barb's, made without any alterations.

Style Arc Barb's Stretch Pants without any alterations.

I didn't like the way they seemed to get caught up on my shoes and not sit properly. 

I have made two pairs with the boot cut alteration, one in black and one in navy and these have been on high rotation in my work wardrobe. The fabric is Style Arc's bengaline and has held up extremely well with all the washing and wearing they have been subject to.

The waist band sits quite high on the waist, (much higher than Style Arc's Elle Pants), and I find them very comfortable. The waist band sits very flat and is quite unobtrusive under tops. Please excuse the wrinkles in the photos as these had been worn to work all day. I'm very happy with the fit, considering these are made without any fit alterations.

The fit in the back is quite good too, without too much wrinkling going on. Sorry, this is not my best angle.

Tilly and the Buttons Coco Tunic with Sewaholic Renfrew Cowl

Now, onto the Tilly and the Buttons Coco Tunic. I think I have lost count of how many times I have used this pattern. Definitely money well spent. For this version I borrowed the cowl from the Sewaholic Renfrew. The fabric was a lovely soft drapey knit of unknown composition which worked very well for this top. The cowl is so lovely and cosy.

This combination has been a favourite lately for work. It's just so easy to wear and so comfortable.

Happy Sewing

Style Arc Franki Dress

I am a big fan of Style Arc patterns and I have had the Franki Dress/Top pattern in my pattern stash for a while now. After my recent binge shop at Spotlight where I spent over $300 in under an hour, I now have quite a selection of polyester/spandex knits just waiting to become summer dresses.

The Franki is a jersey cowl neck dress/top with slightly extended shoulder line. Hugging the neckline at the back and falling softly into a front cowl. 

Usually a size 12 in Style Arc patterns fits me well with very little alterations required. However, this was not the case with the Franki dress. I found the bodice area to be quite loose and I took the side seams in by 2cm each side from the base of the armhole, tapering to nothing at the waist line the get a nicer fit.

Then I had the opposite problem in the tummy/hip area where it was a little too tight. With only 1cm seam allowances I couldn't do much about that, other than to loose a couple of kilos which has helped immensely.

The shape of this dress is quite relaxed and not too figure hugging which I like. It is quite short though. I only turned up a 2cm hem, trying to preserve as much length as possible ( I am about 5'8")

The back neck has a stand up collar which hugs the neckline and after reading several other reviews of this pattern, I decided to interface the back collar section. This did add some body to this quite thin and very drapey knit which certainly helped to stop the collar collapsing.

The armholes were way too low and causing bra exposure. In order to fix this I shortened the armhole binding by about 20cm, which helped draw the armhole circumference in, thus raising the armhole. It is still a little low, so next time I will raise the armhole on the pattern before cutting out. I found the armhole binding to be very narrow and fiddly to apply, so I also widened mine.

The armhole extends past the shoulder line and really hugs the upper arm. This could also be more pronounced due to the tightening of my armhole binding. I chose to leave the binding exposed in an attempt to further fill in the armhole area. I top stitched the seam allowances down with a twin needle to prevent them flipping out.The armholes are not restrictive in any way though, and the dress is comfortable to wear.

The cowl at the front sits very nicely when arranged, but the minute you move there's trouble. I came up with a very effective way of getting the cowl to stay put and to totally eliminate any gaping/flashing scenarios. My solution was to sew a lingerie keeper to the centre of the cowl facing, near the raw edge, which I then clip around my bra at the centre front. I know this won't work with every bra out there, but it works like a charm with mine. It holds the cowl in position and keeps the fabric snug against your chest too.

I wore my Franki dress to work today with my Grainline Morris Blazer which felt like a good combination. I love it when a new addition to the wardrobe works well with what's already in there.

I will leave you with a parting shot of Ollie who was catching up on pats after I had been at work all day.


Happy Sewing

Style Arc Elle Pants and a Couple of Coco Tunics

Way back in May I made another pair of Style Arc Elle Pants. I have been working on the fit, and in addition to raising the waistline and a large calf adjustment tried previously here, I have added a Flat Seat Adjustment. I was trying to reduce the amount of wrinkles at the back, upper thigh area. Here is the photo I posted during Me Made May 15.

I am wearing them here with another Tilly and the Buttons Coco Tunic. This one is without pockets and has the retro funnel neck collar. I love this tunic but I do find it difficult to style. The collar gets in the way of a scarf and necklaces just don't sit right at all.

The fabric is chocolate brown stretch bengaline purchased online from Style Arc, and is good quality. These pants have been worn all day at work and are now quite wrinkled unfortunately for the photos. The fit at the front is quite good. 

I think the flat seat adjustment did improve the fit at the back, compared to my previous Elle's, but there is still room for improvement. I suppose some wrinkles are necessary or you wouldn't be able to sit down.

I had some more of the cream ponte in the stash so I made another Coco Tunic, this time with the scoop neckline borrowed from the Sewaholic Renfrew.

This one has been much easier to style with scarves and necklaces. My daughter gave me this necklace and I love how it ties in with the colours of the outfit. I don't usually wear autumn tones, but I don't mind this outfit on me. Maybe my colours are changing as I am getting older.

I have a fairly rectangular figure with little waist definition, but I love how this tunic gives the illusion of a waist and hips. 

Does anyone else wish they had a stylist when taking blog photos? I find is so hard to get good photos with the garment sitting just right, when I am using the tripod and remote on my own. So often, it's not until I'm editing the photos that I notice all the faults. I guess most of us have this problem.


Happy Sewing

Pink Fleece Tops

Mum gave me a large piece of pink fleece from her fabric stash last year. It took me a while to get to it but I have now used it to make two different tops, based on the same pattern. I know you are probably sick of hearing me rave about the Tilly and the Buttons Coco, but I find this pattern is a great base to work from.

The first top I made way back during Me Made May 15, and those who follow my blog got a sneak peak back then.

This was a straight size 5 with the boat neck and two front pockets. I have worn this a lot over winter as it's lovely and cosy in the fleece. The only draw back is that it seems to keep shrinking with every wash, despite pre-washing the fabric. The sleeves are now quite a bit too short.

The second top was based on the same pattern with quite a few changes. I straightened the side seams from the underarm down to the hem, removing all shaping to create a boxy effect. I borrowed the scoop neckline from the Sewaholic Renfrew as I have done before, and I cut a high - low hemline.

This top was really just a bit of an experiment and has resulted in a wearable muslin. I have learnt a bit during the process and there are things I will change for the next one.

A close up of the side slits and the overly exaggerated high - low hem. I will lengthen the front next time so the difference is less exaggerated.

I had intended to use a knit ribbing band to finish off the neckline, but when I pulled out the ribbing, the colour was not a good match. So I stabilised the edge with clear elastic, turned and top stitched with a twin needle. This worked out quite well. I am wearing it with my Grainline Archer blogged here. 

(These photos were taken during our overnight stay on a yacht in Pittwater, just north of Sydney, for our first wedding anniversary.)

Happy Sewing

Knit Dress in Black and White Stripes

I came across this lovely black and white stripe ponti on my first and only visit to The Remnant Warehouse in Sydney, way back in March. I have purchased from their online shop many times, so it was wonderful to visit the store in person and see and touch the fabrics. The staff are very friendly and helpful too. I just wish I could have spent more time there, but I had a very bored husband with me, so my visit was limited. The fabric blend is 72% Polyester, 23% Viscose and 5% Spandex.

I have been noticing lots of striped dresses in the shops so I assume they must be popular at the moment. I used the Tilly and the Buttons Coco Dress pattern as a base for my dress. This pattern is a firm favourite of mine, if you didn't already know.

I did quite a few design alterations to achieve the look I was after. The flare of the skirt was significantly reduced at the side seams to create a straighter shape.

The scoop neckline was borrowed from Sewaholic's Renfrew top (another favourite pattern).

Originally the neckband was cut with the stripes running in the opposite direction, but it was a disaster. Because the fabric didn't have quite as much stretch in that direction, it made the neckline gather up and not lie flat. I contemplated unpicking the overlocking stitches for a moment, but I then came up with a much easier fix. I simply trimmed the whole neckband and seam allowance off and started again. The neckband was re cut along the direction of the stripes and I carefully positioned it so that the neckband would show a centred black stripe. I then reattached it using a much smaller seam allowance, so as not to increase the size of the neckline too much. 

Although it is difficult to see in the photo, I added two fisheye darts to the back to provide a little shaping. The neckband and hems were all top stitched with a twin needle.

The stripe matching during the construction of this dress was quite fiddly. It involved pinning every black stripe very carefully, then basting the seam, checking for accuracy, unpicking parts and re basting, and then finally sewing the seam. I was using a walking foot too. I am a bit over sewing with stripes and can't wait for a nice easy plain fabric to sew.

These photos were taken last week in Dad and Elizabeth's garden during our visit to Wollongong. I'm loving all the spring flowers. Just wish this last blast of winter weather would go away, so I can enjoy wearing my new spring dress.


Happy Sewing

Colette Mabel Skirt

Colette Mabel

The Colette Mabel skirt is the perfect pattern for a beginner sewist to try. There are three variations to choose from and the instructions are detailed and easy to understand.

This pattern ticked a lot of boxes for me: great wardrobe staple; uses knit fabric; and is quick and easy to sew. I have been admiring lots of Mabel's around the blogsphere for ages, so I don't know why it has taken me so long to give it a try.

This is actually the second Mabel I have made. The first one made a brief appearance during Me Made May.

I made Version 3 with the decorative seaming and kick pleat. My first skirt was made using black ponte purchased from Style Arc. This fabric was a high quality ponte with a nice amount of stretch and excellent recovery, and best of all... no pilling. The fit of this skirt is a little snug around my backside and I will only wear it with a long cardigan.

For my second skirt I used a navy ponte purchased from Spotlight. This is also a high quality ponte but is less elastic than the black ponte from Style Arc. I made a larger size to get the looser fit I was after. It actually turned out too big this time and I had to run the side seams in.

After looking at these photos, I think I should have just made the smaller size, as the fit is a little looser than what I was trying to achieve. I actually had to add some elastic to the waist to make it feel more secure after a few wears. It felt like it might fall down. (The smaller one in the black is fine without the elastic though).

You can see the decorative seaming on the front in the photo above. I top stitched the seam allowance down with a twin needle to highlight the design feature.

The hem was hand stitched for a nicer finish (although it is still quite noticeable in the photo's). I did construct the kick pleat a little differently from the instructions. You are supposed to sew the centre back seam and continue around the pleat, sewing it closed. You then fold it to the side, press and top stitch to hold in place. I had read on several blogs that after sitting in the skirt the pleat refused to hang properly. I sewed the centre back seam stopping at the start of the pleat. I overlocked the raw edges of the pleat sections, folded to one side, and top stitched in place across the top, leaving the pleat open. This has worked out well and as you can see in the photo above, the pleat is hanging just fine and I have been sitting in this skirt all day at work before these photos were taken.

You can expect to see a few more Mabels popping up here in the future. I have already earmarked some fabric in the stash.


Happy Sewing

Blue Grainline Morris Blazer

The new Morris Blazer from Grainline Studio has certainly been doing the rounds out there in blogland. I finally succumbed and bought the PDF version.

Grainline Studio Morris Blazer

After doing lots of internet research, reading many reviews and looking at many Morris Blazers made up on many different body shapes, I decided to make a couple of small changes to the pattern. I cut a size 10 based on my bust measurement and I lengthened both the sleeves and the body by 8cm (about 3 inches).

I am quite long in the body and relatively tall about 173cm (5' 8") and cropped jackets don't suit me very well. I am happy with the new proportions these alterations achieved.

This jacket is quite boxy so if you are after some shaping, this is not the pattern for you. I like the way the jacket fits and it turned out just as I had expected.

The sleeves are only just long enough with the extra length I added and I may add a bit more length for the next one. The original pattern is not intended to have full length sleeves, this was just my preference.

The hems and front openings are finished off with a separate interfaced facing. This provides some structure to these key areas. I did find that the front facings tend to want to flip out a bit during wear, so I may catch them down with some hand stitching to keep them in place. The front edges are finished off with top stitching.

The hem facing is also top stitched which creates an interesting line at the front points. The fabric I used for this blazer was a Monaco Double Knit in Sapphire Blue purchased from Knitwit last year. This was one of my disappointing online purchases that was nothing like I expected and totally unsuitable for what I had intended to make, and therefore has been sitting in my stash for quite a while. Well, if you wait long enough, the perfect pattern turns up. This fabric was ideal for the Morris Blazer and Knitwit currently has this fabric on sale and it comes in lots of lovely colours too.

As you can see in the photo above, I simply overlocked the raw edges of the facings rather than turning them under. I had matching thread in the overlocker, so I thought this would look ok and reduce any unnecessary bulk. 

I can see a few more Morris Blazers in my future, and I can see why this has been a very popular pattern. It is quick and easy to make as well as being easy to wear.


Happy Sewing